Very Low Volume Production Injection Molded Parts
From 10 to 1000 injection molded parts
For Prototype Molds we typically use P20 soft tool steel or 7075 aluminum to make a complete stand-alone mold. We can add custom cooling circuits, hot tips, and other refinements to aid with the production of technical resins or complex geometries. For polished or high-gloss parts, we use NAK-80, a polishing stainless steel. You can find additional information on tolerance capabilities here.
Very low volume production of injection molded parts is ideal for many hundreds up to thousands of parts of varying complexity. This process offers medium tooling and part price.
Low Volume Production Injection Molded Parts
From 1000 to 100,000 injection molded parts
For Pilot Production molds we typically use pre-toughened, high-quality P20 tool steel or NAK-80 stainless tool steel to make a complete mold, which is, in effect, a full production tool without full hardness. To reduce lead times and costs, we do not offer these molds for export; all of our Pilot Production, or 'Bridge tooling' molds are built to local standards.
Low volume production injection molded parts are ideal for thousands to hundreds-of-thousands of parts of varying complexity. This process incurs a higher tooling cost, but a much lower part cost.
Contact us today via email@example.com. We welcome your enquiry.
Full Production Injection Mold tools
These are full production injection mold tools that will be exported outside China for our customers to run in their own facilities or at a local molders (only available for export to USA currently). Molds are to full USA / western standards. Typically up to 8 cavity molds, maximum injection mold press size 500 tons, steel type P20, H13, NAK 80. Open and shut, multi slide, unscrewing etc. are all available. If you have a requirement for full production molds where the molds will be exported to you, contact our export mold team firstname.lastname@example.org.